Summary
This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This position is located within the U.S. Army Installation Management Command, Directorate of Public Works, Operations & Maintenance Division, at Fort Leonard Wood, Missouri.
Duties
- The following duties are at the full performance level and if selected at the lower level you will perform the duties with more than normal supervision.
- Read and interpret contract documents to determine contract requirements and performance standards.
- Read contractor work schedules and quality control reports to determine if contractor is on schedule and reporting satisfactorily.
- Serve as the Contracting Officer Representative (COR) for multiple service contracts.
- Perform on-site inspections of facilities and equipment and determine the condition of the plants and equipment.
- Perform customer services to include verification and resolution of customer complaints.
- Perform contract actions such as formulation of resolicitation packages and modification packages.
- Provide coordination between the customer, the contractor and the contracting officer.
Qualifications
Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for all Engineer positions: Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. NOTE: In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience for GS-07: One year of specialized experience which includes: 1) Assisting in reviewing project, agreement, or contract requirements and performance standards; 2) Interpreting or executing technical, project, or contract documents with review; and 3) Assisting with inspecting completed work to ensure compliance with project, agreement, or contract requirements. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05). OR Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as Engineering. OR Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/). (NOTE: You must attach a copy of your transcripts and/or verification of class standing for further verification.) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages. Specialized Experience for GS-09: One year of specialized experience which includes: 1) Operating within project, agreement, or contract requirements and performance standards with assistance if needed; 2) With guidance, interpreting technical, project, or contract documents; and 3) Inspecting completed work to ensure compliance with project, agreement, or contract requirements with assistance if needed. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as Engineering. The minimum qualifications box is continued below in the education block:
How You Will Be Evaluated
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Veterans and Military Spouses will be considered along with all other candidates.
Education
OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. **FOR ENGINEER SERIES (0800) at the GS-9 level ONLY** Superior Academic Achievement AND 1 year of appropriate professional experience. Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, at the baccalaureate level in an engineering program. Superior Academic Achievement is based on: - (1) Class Standing - You must be in the upper third of the graduating class in the college, university, or major subdivision, based on completed courses; OR - (2) Grade-Point Average (G.P.A.) - You must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR - (3) Honor Society Membership - You may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achshonor.org/). (NOTE: You must attach a copy of your transcripts and/or verification of class standing for further verification.)Professional engineering is defined as non-routine engineering work that required and was characterized by (1) professional knowledge of engineering; (2) professional ability to apply such knowledge to engineering problems; and (3) positive and continuing development of professional knowledge and ability. OR Successfully completed a 5-year program of study of at least 160 semester hours in a bachelor's degree in engineering and 1 year of appropriate professional experience. Professional engineering is defined as non-routine engineering work that required and was characterized by (1) professional knowledge of engineering; (2) professional ability to apply such knowledge to engineering problems; and (3) positive and continuing development of professional knowledge and ability. Specialized Experience for GS-11: One year of specialized experience which includes: 1) Reviewing project, agreement, or contract requirements and performance standards; 2) Interpreting technical, project, or contract documents; 3) Preparing modifications to project specifications, agreements, or contracts; and 4) Inspecting completed work to ensure compliance with project, agreement, or contract requirements. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as Engineering. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/
Required Documents
The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the Applicant Checklist for Public Announcements. As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. 1. Your resume: Your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. For each relevant work experience, make sure you include the employer's name, job title, start and end dates (include month and year), for qualifications purposes, the number of hours worked per week, and a brief description that show you can perform the tasks at the required level listed in the job announcement. If your resume does not contain this information, your application may be marked as incomplete, and you may not receive consideration for this position. Use plain language. Avoid using acronyms and terms that are not easily understood. The hiring agency will not make assumptions about what's in your resume. If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations, and you may not be considered for this vacancy. For additional information, to include formatting tips, see: What to include in your resume. 2. Other supporting documents: Cover Letter, optional Most recent Performance Appraisal, if applicable This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: Transcripts and Licenses NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility.
How To Apply
To apply for this position, you must complete the online questionnaire and submit the documentation specified in the Required Documents section above. The complete application package must be submitted by 11:59 PM (EST) on 08/24/2026 to receive consideration Follow the prompts to select your resume and/or other supporting documents to be included with your application package. As a reminder, your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. For additional information, refer to the 'Required Documents' section. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. Your resume selected in USAJOBS will be included, but you must re-select other documents from your USAJOBS account or your application may be incomplete. It is your responsibility to verify that your application package (resume, supporting documents, and responses to the questionnaire) is complete, accurate, and submitted by the closing date. Uploaded documents may take up to one hour to clear the virus scan. Additional information on how to complete the online application process and submit your online application may be found on the USA Staffing Applicant Resource Center. To verify the status of your application, log into your USAJOBS account (https://www.usajobs.gov/applicant/profile/dashboard/), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://help.usajobs.gov/how-to/application/status.
Security Clearance
Not Required
Other Information
Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest. Direct Deposit of Pay is required. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a(n) Career Program (CP) 18 - Engineers and Scientists position. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information. Permanent Change of Station (PCS) allowances MAY be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest. Recruitment and relocation incentives MAY be authorized. Student loan repayment MAY be authorized. Salary negotiations for candidates new to Federal service MAY be authorized. Credit for prior non-Federal experience and certain military service for leave accrual rates MAY be authorized.
