2mo
Save
Mark Applied
Hide
Electrical Assembler I
Apex, North Carolina, United States
OnsiteFull Time
Must solder small gauge wire; use magnification for small assemblies; experience in assembly, testing, and operating machinery; mechanical aptitude with high precision; ability to read technical drawings; detail-oriented.
Soldering, Magnification, Assembly equipment
1w
Save
Mark Applied
Hide
Mechanical Assembler
Knightdale, North Carolina, United States
OnsiteFull Time
Following work instructions to assemble mechanical and electrical components, perform basic wiring, inspect assemblies, maintain safe workstation, lift up to 35–50 lbs, and stand for full shifts.
torque tools, crimpers, wire strippers, measurement tools, hand tools, power tools, screwdrivers, drills, ratchets
1mo
Save
Mark Applied
Hide
Assembler I - 2nd shift - RPO (67898)
Raleigh, North Carolina, United States
$19/hr OnsiteFull Time
High school diploma/GED required. Follow SOPs to build electrical sub-assemblies, perform visual inspections, use hand and power tools, lift up to 50 lbs, stand for extended periods, distinguish colored wiring; soldering and basic computer experience preferred.
3w
Save
Mark Applied
Hide
Electrical Engineer
Creedmoor, North Carolina, United States
OnsiteFull Time
4+ YOEBachelor's in engineering or equivalent, minimum 4 years manufacturing experience with AC/DC motors, actuators, circuit boards and electronic assemblies; strong troubleshooting, project management, and technical communication skills.
Microsoft Office, LabVIEW, Altium, PLC
1w
Save
Mark Applied
Hide
Electrician - General Contractor
Durham, North Carolina, United States
OnsiteFull Time
Install, assemble, and repair electrical conduit, wiring, control and distribution apparatus; test circuitry; must be 18, pass drug test, and be legally eligible to work in the US.
ohmmeter, oscilloscope, pipe threading machine, conduit bender, saws
3d
Save
Mark Applied
Hide
Electrician - General Contractor
Fuquay Varina, North Carolina, United States
OnsiteFull Time
Install, assemble, and repair electrical conduit, wiring, controls and equipment; read blueprints; test circuitry; must be 18+, pass drug test, and be legally eligible to work in the US.
1mo
Save
Mark Applied
Hide
Assembly Technician
Raleigh, North Carolina, United States
OnsiteFull Time
3+ YOEAssembling complex mechanical units, reading engineering prints and schematics, troubleshooting electrical controls, inspecting parts, and using hand/power tools; 3+ years machinery assembly experience preferred.
Multimeter, Amp meter, oscilloscope, scales, calipers, micrometers
2w
Save
Mark Applied
Hide
R&D Production Technician
Raleigh, North Carolina, United States
OnsiteFull Time
Assemble and modify electro-mechanical assemblies, wire panels from schematics, troubleshoot mechanical/electrical systems; associate degree or equivalent experience and strong mechanical/electrical skills.
Microsoft Office
1mo
Save
Mark Applied
Hide
Millwright (RAL AISIN NW)
Durham, North Carolina, United States
OnsiteFull Time
Reads blueprints, performs machine dismantling/assembly, rigging and alignment, operates hoists/cranes, uses precision measuring tools, follows safety procedures, and must lift up to 50 lbs.
micrometers, calipers, hoists, chain falls, hydraulic-lift trucks, gantry overhead cranes, crowbars, hammers, wrenches, dollies, rollers, plumb bobs, squares, rules
3d
Save
Mark Applied
Hide
Specialty Trades Technician
Chapel Hill, North Carolina, United States
$57k-$66k/yr OnsiteFull Time
2+ YOEHigh school diploma/equivalency and 2+ years related experience; hands-on fabrication, assembly, machine-shop experience; laser tracker metrology operation; geometry/trigonometry knowledge; ability to work at height and lift 40+ lbs.
Leica AT500
1w
Save
Mark Applied
Hide
AV Technician - Level III
Norcross or La Vergne or Tampa or Apex or Columbus or Augusta or Savannah
$27-$35/hr FieldFull Time
Install, terminate, and test low-voltage and fiber cables; read technical schematics; assemble equipment racks; lift up to 50 lbs; climb ladders; supervise Level I/II technicians and manage field operations.
1mo
Save
Mark Applied
Hide
Plumber II
Smithfield, North Carolina, United States
OnsiteFull Time
3+ YOEHigh school diploma/GED, valid North Carolina driver’s license, experience servicing plumbing and irrigation systems (3 years preferred), knowledge of backflow assemblies, multimeter use, OSHA and safety practices, and proficiency with Google applications.
Gmail, Google Docs, Google Sheets, Google Drive, multimeter
1w
Save
Mark Applied
Hide
Robot Technician - 3rd Shift
Sanford, North Carolina, United States
$27-$34/hr OnsiteFull Time
Maintain, troubleshoot, program, and repair Fanuc robots, AGVs/AGCs and automated assembly tooling; strong problem-solving, mechanical/electrical aptitude, and teamwork skills required.
Fanuc, AGV, AGC, Microsoft Word, Microsoft Excel, Microsoft PowerPoint
2mo
Save
Mark Applied
Hide
Firmware Engineer
Cary or South Burlington
$120k-$140k/yr OnsiteFull Time
3+ YOEBachelor's degree in CS/Software/ Electrical Engineering; 3+ years firmware development with ARM SoCs; embedded firmware, Linux, C/Assembly; cross-disciplinary collaboration; no visa sponsorship.
ARM SoCs, x86 UEFI/BIOS, Linux, C, Assembly, Git, JTAG, Logic analyzers, Device trees, UEFI
1mo
Save
Mark Applied
Hide
Mechanical Application Development Engineer
Raleigh, North Carolina, United States
OnsiteFull Time
2+ YOEBS in Mechanical (or Electrical) Engineering, 2+ years product development experience, experience with high-speed connectors and cable assemblies, proficiency in prototyping/FEA/testing, strong communication and problem-solving skills.
Finite Element Analysis (FEA)
1mo
Save
Mark Applied
Hide
Electronics Technician
Raleigh, North Carolina, United States
OnsiteFull Time
10+ YOEAssociate degree (preferred BS) in electrical engineering technology or equivalent experience; 10+ years circuit board assembly/rework; PCB debugging; familiarity with electronic components, lab equipment, CAD, and mechanical prototyping.
schematic and layout CAD tools, CAD, oscilloscopes, multimeters, LCR meters, power supplies, signal generators
2mo
Save
Mark Applied
Hide
Field Service Technician (eastern North Carolina) (Raleigh, NC (USA), North Carolina, US - United States)
Raleigh, North Carolina, United States
$26-$28/hr RemoteFull Time
High school diploma or GED; electromechanical repair/maintenance experience; electrical/mechanical assembly; driver’s license; willingness to lift up to 30 lbs and push/pull 75 lbs; training or certifications preferred; sales experience preferred.
electromechanical equipment, electrical schematics
1w
Save
Mark Applied
Hide
Quality Control Technician
Burlington, North Carolina, United States
OnsiteFull Time
1+ YOE1–4 years quality control experience; associate degree in electrical/mechanical technology or equivalent; knowledge of control panel assembly, wiring, testing, NFPA 70/79 and UL508A; strong attention to detail and technical writing skills.
AutoCAD, AutoCAD Electrical, Autodesk Inventor
1mo
Save
Mark Applied
Hide
Mechanical Application Development Engineer
Raleigh, North Carolina, United States
OnsiteFull Time
2+ YOEBS in Mechanical or Electrical/Electronic Engineering, 2+ years product development/design experience, experience with high-speed connectors and cable assemblies, strong communication, analytical and problem-solving skills; ability to perform design verification, testing and prototype development.
Finite Element analyses (FEA)